Category: Blog

Jumbo Flyer Extend the capabilities of your Polonaise, Symphony or Minstrel wheel by adding a Jumbo Flyer Kit. You can quickly switch back and forth between your regular flyer and the jumbo unit. The Jumbo Flyer has a very large orifice, a .70 inch opening for heavy spinning and plying and a much larger jumbo… Continue reading Extra Flyers for Double Drive Wheels

There are a number of ways to properly warp a loom. A warping peg is included with your Harp loom. Rather than using a warping board for shorter length, narrow projects, use the warping peg approach. This method is shown in the video below.    

Weaving Hooks come with each Kromski loom, but are also available separately. Please talk with your dealer before purchase, as these hooks may not fit other heddles on the market.

Stick Shuttles are available in the following sizes: 4″, 8″, 12″, 16″, 24″ and 32″. Each edge of the shuttle has a knife edge which allows you to use it to beat your weaving. Each Kromski loom comes with two shuttles.  

Pick-up Sticks are available in the following sizes: 9″, 12″, 17″, 25″ and 33″. One end is rounded and beveled to allow easy placement. One comes with each Harp loom. You might think that with a rigid heddle loom your weaving projects must be simple in design. After all, such a loom is inexpensive and… Continue reading Pick-Up Sticks

Heddles come in a variety of sizes called dents to allow you to control of number of ends per inch in your project. The standard heddle with each Kromski loom is 8-dent. Also available are 5, 8, 10 and 12-dent heddles. As you expand your weaving interests, you may want to have more than one… Continue reading Heddles

Because the Kromski Harp conveniently folds with warp and project in place, why not put it in a tote bag for easy storage or travel? Made of polycanvas and featuring canvas handles, the Harp Tote Bag is very sturdy. The base of the tote is re-enforced to provide sturdy support of the loom. With a… Continue reading Harp Tote Bags

Do you need a loom floor stand? Without a stand, the weaver sits with the front beam on the lap and the back end of the loom angled up against a table edge or workbench. This gives you a good view of your work and allows the light weight of the loom to be backstopped… Continue reading Loom Floor Stand

Available in hemp or elastic for double drive wheels and the original elastic for single drive wheels. Learn how to size and tie a band – download PDF. Learn more about double drive spinning wheels and single drive spinning wheels.

Keep your wheel in great working condition with wheel oil. The long needle nose applicator is perfect to get oil to the right location on your spinning wheel. Also perfect for oiling tools in the shop.